NVT Phybridge 4 Channel Cable Passive Integrator, Typically Installed IN The Wiring, Power Video And Data Are Converted AT The Camera Using A PVD™

NVT Phybridge 4 Channel Cable Passive Integrator
"Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD is a passive "pass-through" wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.

Power, video and data are converted at the camera using a PVD™ transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each camera's signals to the NV-704J-PVD. Up to four cameras are supported. The NV-704J-PVD receives low-voltage camera power from any third-party Class 2 power supply. Control Room video connections are achieved with a single 4-pair RJ45 cable. P/T/Z telemetry data, if required, passes through a second 4-pair RJ45 cable and delivers P/T/Z telemetry. Control Room connections may be made using any multi-channel NVT Phybridge receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts."

• Limited lifetime warranty


• Cable-management solution from the camera to the Wiring Closet and on to the Control Room


• Wall-mountable; rack-mountable using the NV-RM8/10 panel


• Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Calculator)


• Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera


• Connectivity for up to four cameras, each via a single RJ45 4-pair cable