Dbx ZONEPRO 641M DIGITAL ZONE, 641M Cable, 6x4 Digital Zone Processor The ZonePRO 641m Offers Fixed I/O Pre Configured

dbx 6x4 Digital Zone Processor

The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.

• 6 Inputs / 4 Outputs


• 4 Balanced Mic/Line Inputs


• 2 Unbalanced, Mono-Summed RCA Input Pairs


• Microphone Gain per Channel


• Pre-Configured Architecture


• Two Configurable Input Insert Positions


• One Configurable Output Insert Position


• AutoWarmth® per Output Zone


• Link Bus


• Optional ZC Controllers


• Ethernet Control


• Serial Control


• Third Party Control


• Wizard-Driven Configuration