Omnitron Systems OmniConverter 10GPoEBT/Sx 3062B-0-24-9 Ethernet Switch

Omnitron Systems OmniConverter 10GPoEBT/Sx 3062B-0-24-9 Ethernet Switch
The OmniConverter 10GPoEBT/Sx are unmanaged Ethernet switches that feature two 1/10G uplink ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet user ports. The 10GPoEBT/Sx available with 60W or 100W (IEEE 802.3bt) per user port.

The OmniConverter PoE switches are Layer 2 Ethernet switches that forward frames to any port based on their MAC address.

All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

The switches support daisy-chain configurations and redundant uplinks for critical applications that require protection and sub 50ms restoration in the event of an uplink failure.

The switches support Dual Device mode that enables the 10GPoEBT/Sx to operate as two independent and isolated Ethernet switches.

The 10GPoEBT/Sx modes of operation can be configured using easily accessible DIP-switches. Each DIP-switch function is labeled on the side of the OmniConverter for ease of identification and use.

The OmniConverter switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or single-fiber and standard or CWDM wavelengths.

The switches automatically negotiate and deliver the power level required by a Powered Device (PD) partner. Depending on the model of the OmniConverter PoE switch, the switch can deliver up to 60 or 100 Watts of power per user port.

The switches features a Remote PoE Power Reset that can be configured with a DIP-switch. This feature enables the user to remotely power-cycle and reset each PD increasing network reliability, up time and save manpower time and expense by automating the recovery of remote PD equipment.

All models can be wall mounted, rack mounted using a shelf or DIN-rail mounted using DIN-rail mounting clips. They are available with an external 100 to 240V AC power adapter or with a DC terminal connector.

• Ethernet Switch provides reliable, efficient connectivity to ensure maximum feasibility


• Terminal Block (2 Wire) plug/connector type for maximum usability with added reliability


• Conveniently lets you connect two standard Ethernet ports to ensure maximum efficiency


• Quickly and easily set up a wired network with 6 networking ports


• With leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience


• Wall Mountable form factor for your convenience and simplicity of usage


• Gigabit Ethernet port for ultra-fast network speeds


• Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components