Perle IDS-409G3-T2MD05-SD40 - Industrial Managed Ethernet Switch

Perle IDS-409G3-T2MD05-SD40 - Industrial Managed Ethernet Switch

The IDS-409G is a 9 port Managed Ethernet Switch that can operate in industrial environments providing advanced performance and enabling real-time deterministic network operation. Choose any combination of 10/100/1000-Base-T Ethernet copper ports and 1000Base-X fiber ports to meet the needs of your environment.

Utilizing fiber is critical in environments, like industrial plants, where high levels of electromagnetic interference (EMI) is a common phenomenon. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.

With over 82 models, the Perle IDS-409G offers a choice of connectors, fiber types, temperature support and operating distances.

Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.

Simple Plug and Play installation to get your Ethernet devices networked immediately is available with Perle's Fast Setup feature. The familiar Command Line Interface (CLI), via in-band Telnet or the out-band serial console port, will be appreciated by CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network Professional) trained engineers.

P-Ring, management VLAN, QoS, RMON, N:1 port mirroring and local alert log, are only a few of the comprehensive management functions supported in the IDS-409G. In addition, the switch can be managed with an IPv6 address.

These rugged fan-less switches that are hardened to provide superior reliability in -10 to 60°C. In addition, every component on every industrial (XT) model has been designed and tested to handle operating temperatures between -40 and 75°C.

All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection.

For over 35 years Perle has been designing industrial hardware. This expertise was used to design the toughest Ethernet switches on the market that will keep your system running for years to come.

IDS-409G Industrial Managed DIN Rail Switch Features

Zero-touch discovery using Dynamic Host Control Protocol (DHCP), Perle's "Fast Setup" for first time installation, provides simple deployment in Ethernet environments

Resiliency

• 
  STP and RSTP protocols for fast recovery


• 
  Perle's P-Ring protocol for fast convergence in ring topologies


• 
  Link Standby is a link recovery feature for two links that provides a simple alternative to spanning tree protocols for link redundancy

Manageability

• 
  Web Device Manager, Telnet, SNMP and Perle's PerleView NMS for centralized management


• 
  In-band management via RJ45 or USB serial port


• 
  Use an IPv4 or IPv6 address

• Effectively increases available bandwidth on your network


• Terminal Block plug/connector type for convenient Ethernet Switch usage with added power supply dependability


• Quickly and easily set up a wired network with 9 networking ports


• Supports layer 3 switching for enhanced performance and usability


• DIN Rail Mountable form factor allows hassle-free and easy usage with increased efficiency


• Management capability provides control over setup and configuration of your network


• Gigabit Ethernet port for ultra-fast network speeds


• Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters